AudiobyRayAudio tools, properly researched.

PLUGIN & PRODUCTION GUIDE

STEREOVAULT

A source-checked guide to Mastering The Mix STEREOVAULT, covering Smart Presets, transparent and creative multiband stereo processing, reference matching, level matching and mono-safe evaluation.

Mastering The Mix PluginsStereo Width4.5/5 at Plugin BoutiqueWindows 10 or higher. 64-bit VST 3 or 64-bit AAX host.
  • Smart Presets: STEREOVAULT analyzes your audio and suggests instrument (mix, music, bass, drums, vocals) and genre-specific stereo width settings across Focused, Balanced, Wide, and Super Wide options.
  • Level Match: After analysis, adjustments are loudness-compensated so users can hear the true stereo change rather than being influenced by a volume increase.
  • Reference Track Import: Users can import a reference track and STEREOVAULT will generate a width preset based on the stereo profile of that reference.
STEREOVAULT by Mastering The Mix – Plugin Boutique

FROM THE DEVELOPER

Mastering The Mix Plugins

Explore more instruments, effects and production tools from this developer.

PRODUCER’S TAKE

Where does STEREOVAULT fit in your setup?

STEREOVAULT is a stereo width production tool from Mastering The Mix Plugins. It fits sessions built around mixing, mastering, sound design and vocal production.

What stands out: Smart Presets: STEREOVAULT analyzes your audio and suggests instrument (mix, music, bass, drums, vocals) and genre-specific stereo width settings across Focused, Balanced, Wide, and Super Wide options.; Level Match: After analysis, adjustments are loudness-compensated so users can hear the true stereo change rather than being influenced by a volume increase.; Reference Track Import: Users can import a reference track and STEREOVAULT will generate a width preset based on the stereo profile of that reference..

Based on the currently verified product listing and cited sources.

GOOD FIT FOR
MixingMasteringSound designVocal productionDrum productionBass production

SOUND & WORKFLOW

What STEREOVAULT brings to a session

STEREOVAULT analyzes your audio, helps you find a great stereo width, then gives you powerful tools to shape it further, with every move level matched so you can trust what you are hearing. 

STEREOVAULT was built around a simple idea: stereo width deserves the same level of care as EQ, compression, saturation, and limiting.

Producers often spend hours balancing tone and dynamics, then treat stereo as an afterthought by adding a broad widener across a sound or full mix. That can make the audio feel bigger at first, but it can also weaken the low end, blur the middle of the mix, create phase issues, and make the track translate poorly outside the studio.

STEREOVAULT helps solve that by making stereo shaping more intentional. The plugin starts by analyzing the audio and giving the user a smart starting point based on the source and genre. From there, the user can choose whether the sound should feel more focused, balanced, wide, or super wide. Instead of pushing everything outward, STEREOVAULT helps the user decide whether the audio needs to be widened, narrowed, cleaned up, or repositioned.

The plugin is designed to work across the full production process. On a master bus, Transparent Mode gives clean, precise stereo control with mastering-grade crossover filters. On individual tracks and stems, Flexible Mode gives more freedom for creative processing, allowing different band layouts across different tabs.

The six processing tabs give users a wide range of stereo tools in one interface. Spread handles clean stereo enhancement, Creative adds movement and spatial character, Panorama controls frequency-specific placement, Width manages the balance between Mid and Side energy, Rotate repositions stereo information in less conventional ways, and Clean provides transparent Mid or Side EQ for precise correction.

A key part of the plugin is Level Match. Wider or more processed sounds often feel better simply because they are louder. STEREOVAULT removes that bias by loudness-compensating adjustments after analysis, helping users make decisions based on the actual stereo change rather than the level change.

The real-time Stereo Visualiser gives immediate feedback on what is happening across the frequency spectrum. This helps users see whether the low end is staying focused, whether the top end is becoming too wide, and whether phase issues are being introduced. The 3D view makes stereo placement more intuitive by showing Mid energy closer and Side energy further away, creating a room-like visual map of the stereo field.

STEREOVAULT can also generate a preset from a reference track, allowing users to shape their stereo image towards the width profile of a professional release. This makes it easier to understand how wide a mix should feel in context, instead of relying purely on instinct or monitoring conditions.

The result is a stereo tool that is not just about making things bigger. It is about helping producers make the right stereo decision for the sound, the mix, and the final release.

Features

  • Smart Presets: STEREOVAULT analyzes your audio and suggests instrument (mix, music, bass, drums, vocals) and genre-specific stereo width settings across Focused, Balanced, Wide, and Super Wide options.
  • Level Match: After analysis, adjustments are loudness-compensated so users can hear the true stereo change rather than being influenced by a volume increase.
  • Reference Track Import: Users can import a reference track and STEREOVAULT will generate a width preset based on the stereo profile of that reference.
  • Stereo Visualiser: A real-time frequency-spectrum display shows what the stereo image is doing across the full range. The 2D view gives clear width feedback, while the 3D mode maps Mid and Side energy into a room-like view for more intuitive stereo placement. The display goes red to show frequency-specific phase warnings.
  • Transparent Mode: A mastering-grade workflow designed for clean stereo processing on full mixes and masters, using ultra-clean crossover filters and a shared band layout across tabs.
  • Flexible Mode: A more creative workflow that allows moveable bands per tab, making it ideal for mixing, sound design, and detailed stereo shaping on individual tracks and stems.
  • Six Processing Tabs: STEREOVAULT includes Spread, Creative, Panorama, Width, Rotate, and Clean, giving users a complete stereo toolkit rather than a single broad widening control.
  • Spread Tab: Includes Pristine for clean M/S-based widening, Diffuse for smooth allpass-based width, and Vintage for Orban-style pseudo-stereo width on mono or narrow material.
  • Creative Tab: Includes Stretch, Flux, Chorus, Haas, and Space for more characterful stereo movement, depth, and width effects.
  • Panorama Tab: Allows frequency-specific panning and stereo rebalancing, helping users place different parts of a sound across the stereo field with more precision.
  • Width Tab: Lets users redistribute Mid and Side energy using Blend and Balance modes, giving control over the centre and edges of the stereo image.
  • Rotate Tab: Repositions stereo energy within the field, either across the full signal, Mid only, or Side only, creating separation without traditional panning.
  • Clean Tab: Provides transparent Side EQ or Mid EQ, allowing users to boost or cut stereo energy per band while maintaining excellent mono compatibility.
  • Up To 6 Frequency Bands: The Band Editor and QuickSplit workflow make it fast to create up to six bands for independent stereo processing across the frequency spectrum.

PRODUCER HIGHLIGHTS

The sounds and controls that matter

  • Smart Presets: STEREOVAULT analyzes your audio and suggests instrument (mix, music, bass, drums, vocals) and genre-specific stereo width settings across Focused, Balanced, Wide, and Super Wide options.
  • Level Match: After analysis, adjustments are loudness-compensated so users can hear the true stereo change rather than being influenced by a volume increase.
  • Reference Track Import: Users can import a reference track and STEREOVAULT will generate a width preset based on the stereo profile of that reference.
  • Stereo Visualiser: A real-time frequency-spectrum display shows what the stereo image is doing across the full range. The 2D view gives clear width feedback, while the 3D mode maps Mid and Side energy into a room-like view for more intuitive stereo placement. The display goes red to show frequency-specific phase warnings.
  • Transparent Mode: A mastering-grade workflow designed for clean stereo processing on full mixes and masters, using ultra-clean crossover filters and a shared band layout across tabs.
  • Flexible Mode: A more creative workflow that allows moveable bands per tab, making it ideal for mixing, sound design, and detailed stereo shaping on individual tracks and stems.
  • Six Processing Tabs: STEREOVAULT includes Spread, Creative, Panorama, Width, Rotate, and Clean, giving users a complete stereo toolkit rather than a single broad widening control.
  • Spread Tab: Includes Pristine for clean M/S-based widening, Diffuse for smooth allpass-based width, and Vintage for Orban-style pseudo-stereo width on mono or narrow material.
  • Creative Tab: Includes Stretch, Flux, Chorus, Haas, and Space for more characterful stereo movement, depth, and width effects.
  • Panorama Tab: Allows frequency-specific panning and stereo rebalancing, helping users place different parts of a sound across the stereo field with more precision.

IN THE BOX

What you get

Every instrument, effect or expansion included in this edition.

Mastering The Mix All Plugins Bundle

CategoryEffects Bundles

PriceEUR 384.13

CUSTOMER RATING SNAPSHOT

4.5/5

Based on 26 ratings at Plugin Boutique.

Checked October 13, 2026

PRODUCER FEEDBACK

What producers and users say about STEREOVAULT

Visible review sample: 5★ × 3 · 4★ × 2. This sample is shown as context and may not represent every rating.

Plugin Boutique supplies the rating. AudiobyRay groups recurring themes from the available review sample and does not republish full reviews.

Read all current reviews at Plugin Boutique ↗

DEEP DIVE

STEREOVAULT in the studio

STEREOVAULT: deliberate stereo shaping instead of one-knob widening

STEREOVAULT is Mastering The Mix's stereo-width and imaging processor for tracks, buses and complete mixes. Its central idea is that stereo decisions should be evaluated with the same care as equalization and dynamics. Instead of applying one broad widening amount to the whole signal, it analyzes the source, suggests a starting point and provides frequency-selective tools for widening, narrowing, placement, movement and cleanup.

The plug-in can work transparently on a master or more creatively on an individual instrument. That range is useful, but it also makes restraint important. A wider signal often appears more impressive during a quick comparison, even when low-frequency focus, centre definition or mono translation becomes worse. STEREOVAULT's level matching, visualizer and phase warnings are intended to make those trade-offs easier to hear and see.

This is an independent, source-checked guide, not a hands-on listening test. AudiobyRay has not installed or measured STEREOVAULT. The processing descriptions below come from its current official manual; the suggested evaluation exercises are editorial guidance, not measured results.

Analysis and Smart Presets

The manual's quick-start workflow begins by loading STEREOVAULT on a stereo track or bus, playing audio and clicking Analyze. The plug-in then suggests a Smart Preset based on the selected source type and genre. Current categories include mix, music, bass, drums and vocals, with Focused, Balanced, Wide and Super Wide directions.

Treat the suggestion as a starting point rather than an automatic approval. Play the loudest and most complex section, then compare neighbouring presets and bypass. A bass stem may benefit from a focused low end and wider upper harmonics, while a vocal bus may need only a small change above the fundamental range. The analysis cannot know the role of every element around the source, so final decisions still belong in the full arrangement.

Transparent and Flexible modes

Transparent Mode is intended for clean mastering and mix-bus work. It uses high-quality crossover filtering and keeps a shared band layout across the processing tabs. That consistency helps when several operations must act on the same frequency regions without introducing a different split for every tab.

Flexible Mode allows each tab to use its own movable band layout. It is better suited to tracks, stems and sound design where one process may target the low mids while another affects only the high-frequency sides. The freedom can create more complex results, so save a neutral state and add one operation at a time. If the purpose of a band cannot be explained, it may not be helping the mix.

Spread: three approaches to width

The Spread tab offers Pristine, Diffuse and Vintage algorithms. Pristine provides clean Mid/Side-based widening. Diffuse uses all-pass processing for a smoother spread, while Vintage applies an Orban-style pseudo-stereo approach that can create width from mono or narrow material. These algorithms are not interchangeable: each changes correlation, transients and tone differently.

Use Pristine when the source already has useful stereo information that needs controlled redistribution. Try Diffuse on sustained pads or ambience where a less obvious movement is desirable. Reserve Vintage for sources that genuinely need pseudo-stereo character, and check the result in mono before committing. A mono synth made exciting through phase difference can partly disappear when collapsed.

Creative movement and spatial character

The Creative tab includes Stretch, Flux, Chorus, Haas and Space. These options move beyond corrective imaging into audible sound design. Chorus and Flux can animate static material; Haas can create a strong directional spread through timing differences; Space and Stretch can make a source feel larger or more separated.

Creative processing is most effective when the dry centre remains intentional. On a guitar, synth or backing vocal, automate the effect into a chorus rather than leaving it at maximum for the whole song. Haas-style width deserves particular caution because timing differences can change localisation and mono balance. Print an effected version and a clean fallback when the sound becomes part of the arrangement.

Panorama, Width and Rotate

Panorama enables frequency-specific positioning, which can rebalance a stereo recording without moving every frequency together. A percussion loop with an overly dominant high-frequency element on one side can be corrected while its low-frequency body remains stable. Make small movements and compare at low monitor level; a visually centred plot does not guarantee a musically centred image.

The Width tab manages the relationship between Mid and Side energy. Blend exchanges Mid and Side signals, while Balance independently reduces either component. These are materially different operations: exchanging the components is not simply turning up a conventional width control. Rotate repositions stereo information and can act on the full signal, Mid or Side components. Try a small amount, compare against bypass, and retain a clean fallback before committing an unusual spatial treatment.

Clean tab and low-end stability

Clean provides transparent Mid or Side equalization across frequency bands. This can remove excessive low-frequency Side energy, reduce harsh edge content or clarify the centre without adding another separate Mid/Side EQ. On a master, begin by inspecting rather than automatically narrowing everything below a fixed frequency. Some acoustic recordings contain legitimate low-frequency stereo information, while club-oriented electronic mixes often benefit from a more stable centre.

Check kick and bass interaction, correlation and mono playback together. A visually narrow low band can still feel weak if the Mid signal has been reduced elsewhere. Conversely, a controlled side cut may improve impact without making the mix audibly smaller.

Band Editor and visual feedback

STEREOVAULT supports up to six frequency bands. The Band Editor and QuickSplit workflow make it possible to define regions for independent processing. More bands do not automatically mean more precision: every crossover introduces another decision and increases the chance of creating inconsistent movement between neighbouring areas.

The real-time Stereo Visualizer shows width across the frequency spectrum. Its two-dimensional view provides direct feedback, while the three-dimensional display maps Mid energy closer and Side energy farther away. Frequency-specific phase warnings turn red when attention is needed. Use the display to locate a problem, then close or ignore it briefly and confirm the result by listening. Visual symmetry and maximum width are not mastering targets.

Level Match and honest comparisons

Level Match compensates for loudness changes after analysis. This matters because stereo processing can alter peaks, correlation and perceived energy, making the processed signal seem better simply because it is louder. Compare bypass and processed states at matched loudness, preferably across several sections and monitoring levels.

For a master, make one conservative pass and one stress-test pass. Check headphones, speakers, mono and a small playback system. The conservative version often translates better even when the extreme pass sounds larger in the studio. On individual tracks, level matching also reveals whether the effect creates useful separation or merely adds diffuse energy.

Reference-track width matching

A reference track can be imported so STEREOVAULT can generate a width preset from its stereo profile. Choose a reference with a similar arrangement and production density, and use the same musical section for comparison. Matching the width profile of a sparse verse to a dense chorus can lead to the wrong target.

The generated preset is an analytical reference, not a guarantee of equivalent translation. Different instrumentation, phase relationships and mastering levels can produce the same apparent width for different reasons. Keep the reference level matched and use it to ask why a frequency region differs before accepting the proposed move.

DAW compatibility and installation

Mastering The Mix currently lists macOS 10.15 or later with 64-bit AU, VST3 or AAX hosts and native Apple-silicon support. Windows requires Windows 10 or later with a 64-bit VST3 or AAX host. Check the official product page and manual before purchase because operating-system and host support can change.

Install the correct format for the DAW, authorize according to the current manufacturer instructions and test preset recall before using the plug-in on a deadline. When exchanging sessions, note the plug-in version and render a processed reference. If a collaborator does not own STEREOVAULT, send a time-aligned processed stem and a clean alternative.

Reviews and evaluation method

The exact Plugin Boutique review source was checked on 13 October 2026. It displayed an average of 4.5 from 26 ratings. Its visible written feedback praises flexible imaging and ease of stereo adjustment; one buyer requests more presets, and another raises performance and latency concerns. These are attributed customer reports, not verified benchmarks. The manufacturer also hosts endorsements and customer comments, but those are separate evidence and should not be merged into the retailer rating.

Use the trial on three different tasks: stabilize a full mix, widen a narrow instrument and correct an unbalanced stereo loop. Measure how quickly the analysis reaches a useful starting point, whether level matching changes the decision, and whether the result survives mono. That test reveals more than pushing one demonstration file to maximum width.

Verdict

STEREOVAULT is a comprehensive stereo workstation rather than a simple widener. Smart analysis, Transparent and Flexible modes, six processing tabs, up to six bands, reference matching, visualization and level compensation cover both corrective and creative imaging. Its value is highest for producers who will use those tools deliberately and verify translation. Start with one clear stereo problem, make the smallest effective move and keep mono compatibility and centre stability ahead of visual spectacle.

Sources and fact-check
  1. Mastering The Mix official STEREOVAULT product page — checked October 13, 2026
  2. Mastering The Mix official STEREOVAULT manual — checked October 13, 2026
  3. Plugin Boutique STEREOVAULT listing — checked October 13, 2026
  4. Plugin Boutique exact STEREOVAULT customer reviews — checked October 13, 2026

STUDIO COMPATIBILITY

Will it run in your DAW setup?

OS support

  • Windows 10 or higher. 64-bit VST 3 or 64-bit AAX host.

BEFORE YOU INSTALL

Manuals, installers and official support

PRODUCER FAQ

Common setup and workflow questions

Which operating systems can run STEREOVAULT?

Windows 10 or higher. 64-bit VST 3 or 64-bit AAX host.

Check the current Plugin Boutique dealAffiliate link: AudiobyRay may earn a commission at no extra cost to you.