AudiobyRayAudio tools, properly researched.

PLUGIN & PRODUCTION GUIDE

Disperser

Disperser researched: all-pass filtering, group delay, transient reshaping, crest-factor limits, Snapin use and current requirements.

Kilohearts PluginsFilter4.5/5 at Plugin BoutiqueVST2, VST3, AAX; Audio Units on macOSWindows or macOS versions actively maintained by their respective vendors
  • All-pass filtering with frequency-dependent group delay
  • Amount changes all-pass filter order
  • Frequency positions the delay concentration
Disperser compact Snapin interface – Plugin Boutique

FROM THE DEVELOPER

Kilohearts Plugins

Explore more instruments, effects and production tools from this developer.

PRODUCER’S TAKE

Where does Disperser fit in your setup?

Disperser is a filter production tool from Kilohearts Plugins. It fits sessions built around bass production and synth production.

What stands out: All-pass filtering with frequency-dependent group delay; Amount changes all-pass filter order; Frequency positions the delay concentration.

Based on the currently verified product listing and cited sources.

GOOD FIT FOR
Bass productionSynth production

SOUND & WORKFLOW

What Disperser brings to a session

All-pass transient reshaping with Amount, Frequency and Pinch controls. Flat magnitude response with frequency-dependent phase and group delay; conventional and compact Snapin interfaces.

PRODUCER HIGHLIGHTS

The sounds and controls that matter

  • All-pass filtering with frequency-dependent group delay
  • Amount changes all-pass filter order
  • Frequency positions the delay concentration
  • Pinch adjusts filter Q
  • Conventional and Snapin layouts expose the same controls

CUSTOMER RATING SNAPSHOT

4.5/5

Based on 922 ratings at Plugin Boutique.

Checked November 4, 2026

PRODUCER FEEDBACK

What producers and users say about Disperser

What users like

  • Visible comments discuss synthetic character, kick transients and creative automation.

Worth knowing before you buy

  • Headroom statements are customer opinions, not AudiobyRay measurements.
  • Five written comments are a small sample, separate from 922 aggregate ratings.

Visible review sample: 5★ × 3 · 4★ × 2. This sample is shown as context and may not represent every rating.

Plugin Boutique supplies the rating. AudiobyRay groups recurring themes from the available review sample and does not republish full reviews.

Read all current reviews at Plugin Boutique ↗

DEEP DIVE

Disperser in the studio

Disperser: change transient shape through frequency-dependent delay

Kilohearts Disperser uses all-pass filtering to change the timing relationships between frequencies. It is a different approach from boosting bass with an equalizer or reducing peaks with a compressor. The frequency magnitude response remains flat, while the waveform and its peaks can change because its components no longer arrive together in the same way. This guide follows the official product page, current manual, system requirements, installation guidance and exact Plugin Boutique listing. AudiobyRay has not installed or listening-tested this copy and makes no measured headroom or processor-load claim.

The display represents delay, not an EQ boost

The manual identifies the graph as a group-delay curve: a higher part of the curve means more delay at those frequencies. That interpretation is essential when using Disperser. A prominent bump in the display should not be read as a conventional equalizer boost. The effect can still change the perceived weight or attack of a sound, because time relationships contribute to the shape of its transient. Flat spectral magnitude does not mean an unchanged waveform or an unchanged relationship with other tracks.

For an initial audition, use a short source with a clear attack and enough silence afterwards to reveal any spreading. Compare the processed event with bypass without adjusting other effects. Listen separately to the initial impact and what follows it. If the whole signal chain changes simultaneously, it becomes difficult to determine whether a heavier impression came from Disperser, a later dynamics processor or a simple level adjustment elsewhere.

Amount increases the order of the all-pass filtering

Amount makes the effect more pronounced by increasing filter order. The documentation describes small settings as subtle phase changes and higher settings as increasingly audible frequency-dependent delay. This is why the same tool can be considered for restrained peak reshaping or an obvious synthetic transient effect. It is not a threshold control that begins processing only when the input exceeds a chosen level, and it is not an automatic loudness target.

Turn Amount up gradually while keeping Frequency and Pinch fixed. Stop at a useful result before assuming the largest setting offers the largest improvement. A pronounced sweep may make sense as a sound-design gesture but occupy too much time in a tightly arranged percussion pattern. A smaller setting can preserve more of the original articulation. Compare the complete phrase, not just an isolated hit, because the extra movement may interact with the following event.

Frequency places the delay concentration

The Frequency control moves the all-pass filter's selected frequency. Although the interface uses familiar filter terminology, this is not a low-pass cutoff that removes everything above its setting. Moving it changes where the timing effect is concentrated. The manual notes that lower frequency settings make group delay more pronounced. When investigating a bass or kick, sweep this control while keeping the amount moderate, then choose a position before adjusting the strength further.

A useful evaluation includes both the processed track and its partner in the low end. A kick that sounds attractive alone may land differently against a bass line after its low-frequency components are delayed. Recheck their combined attack, rather than assuming an isolated improvement must transfer unchanged to the arrangement. If the effect is automated, audition the transition itself as well as its start and end positions. A moving phase relationship is part of the effect.

Pinch narrows the concentration

Pinch changes the filter Q, concentrating the group delay around the chosen frequency. Treat it as a way to reshape the timing contour. It offers a different decision from moving Frequency or increasing Amount: the same central region can be affected over a narrower range. With a sustained synthetic source, that concentration can become a conspicuous part of the character. With percussion, it can change how the body develops after the initial attack.

Compare a broad setting with a more concentrated one at a fixed Frequency. If a narrow setting adds an appealing note-like impression, check whether it remains useful across the part's pitch changes. A setting chosen on one bass note may not have the same relationship to the next. This is a reason to test a representative phrase rather than saving a preset after hearing only one especially flattering event.

Crest factor is an outcome to measure

Crest factor describes the relationship between peak level and average signal power. All-pass phase changes can alter that relationship without a conventional gain boost or reduction. The manual discusses this as one possible use of Disperser. It should not be turned into a guarantee that every signal will gain a fixed number of decibels of headroom. The result depends on the original waveform and the chosen filter settings.

If peak management is the goal, compare actual peak measurements and average level over the same passage before and after processing. Then listen for the timing changes that produced the difference. A smaller peak is not automatically a better musical transient, and a useful creative effect is not automatically the best peak-control method. Check any downstream compressor or limiter too: it receives a changed waveform, so its response may change even though Disperser is not operating as a dynamics processor itself.

Parallel paths and interface versions

Because Disperser changes phase relationships, blending it with an unprocessed copy can change the combined frequency balance. The flat response of the processed path alone does not promise an unchanged response after that summing. Begin with an insert and evaluate any parallel blend deliberately. Check the mono result if the treatment becomes part of a wider stereo construction, and compare the full bus before committing to a processing chain.

The product has a conventional plug-in interface and a compact Snapin presentation for compatible Kilohearts hosts. The official page states that both presentations expose the same controls. Gallery images therefore show different layouts without implying two different processing products. In Snapin mode, Disperser can be used within hosts such as Snap Heap. The host provides the surrounding routing and modulation context; buying this effect does not include every separately sold host.

Current support and authorization

The current system documentation specifies 64-bit x86 processors with SSE3, with Apple M-series architecture supported on macOS. It requires a compatible VST2, VST3, AAX or Audio Units host. Operating-system support follows versions actively maintained by Microsoft or Apple, rather than one permanent numeric baseline. Use a trial to check an older configuration instead of treating a loadable format as a support guarantee.

The installation guide covers the Kilohearts Installer, account authentication, format selection and an offline-installation route. Direct Kilohearts editions require no licensing hardware; Slate Digital-distributed editions use a separate iLok arrangement. Updating one product can update code shared by the wider range, so verify important existing sessions afterwards. No particular latency figure or CPU result is asserted here without an actual measurement in the intended host.

Customer evidence and purchase context

The exact retailer review endpoint returned 4.5 out of 5 from 922 ratings and five written reviews. Visible comments discuss synthetic character, kick transients, low-end weight and creative automation. Statements about preserved headroom are customer opinions rather than measurements made for this page. Five written comments do not establish universal results, and the 922 figure counts ratings rather than written reviews.

For a more conventional animated filter workflow, FilterFreak offers a different starting point. Choose Disperser when the interesting question concerns frequency-dependent timing and transient structure. Consult the official product page, control manual and exact retailer offer together, then audition the effect in the actual arrangement before purchasing.

Sources and fact-check
  1. Official Disperser product — checked November 4, 2026
  2. Official Disperser control manual — checked November 4, 2026
  3. Current system requirements — checked November 4, 2026
  4. Exact Disperser Plugin Boutique offer — checked November 4, 2026
  5. Installation and licensing guide — checked November 4, 2026

STUDIO COMPATIBILITY

Will it run in your DAW setup?

OS support

  • Windows or macOS versions actively maintained by their respective vendors

Studio computer requirements

  • 64-bit x86 CPU with SSE3; Apple M-series supported on macOS.
  • Retailer additionally lists 2 GHz CPU and 1 GB memory; actual load varies by settings and host.

DAW plug-in formats

  • VST2, VST3, AAX; Audio Units on macOS

Install and activation

  • Direct Kilohearts versions require no licensing hardware.
  • Kilohearts Installer authenticates account; official offline installation route available. Slate Digital-distributed versions use a separate iLok route.

BEFORE YOU INSTALL

Manuals, installers and official support

Peak and crest-factor changes depend on source and settings; no guaranteed headroom improvement.

Parallel summing with a dry path can change combined frequency balance.

Operating-system support follows actively maintained Windows/macOS versions.

Snapin hosts are separately licensed; context logo does not add included software.

Documentation-based research; no AudiobyRay listening, latency or CPU benchmark.

PRODUCER FAQ

Common setup and workflow questions

Which operating systems can run Disperser?

Windows or macOS versions actively maintained by their respective vendors

Which Disperser formats can I load in my DAW?

VST2, VST3, AAX; Audio Units on macOS

What does Disperser need from my studio computer?

64-bit x86 CPU with SSE3; Apple M-series supported on macOS. Retailer additionally lists 2 GHz CPU and 1 GB memory; actual load varies by settings and host.

How do I install and activate Disperser?

Direct Kilohearts versions require no licensing hardware. Kilohearts Installer authenticates account; official offline installation route available. Slate Digital-distributed versions use a separate iLok route.

Check the current Plugin Boutique dealAffiliate link: AudiobyRay may earn a commission at no extra cost to you.