How to Contextually EQ Acoustic Guitar in a Mix

Watch the How to Contextually EQ Acoustic Guitar in a Mix from YouTube here

How to Contextually EQ Acoustic Guitar in a Mix

Alright, in this video, we’re going to take
a look at the acoustic guitars, and with acoustics,

I have kind of two main mindsets for EQ and
shaping the tone of the acoustics.

We’ll look at compression in a little bit,
but as far as EQ goes, when an acoustic plays

by itself, I want it to have – a lot of
times, I want it to have a full bodied, warm

sound.

Some top end, but I don’t want it to be necessarily
too bright.

Just to my ear, I really like a full, warm
bodied acoustic sound when the guitar is by

itself, and then whenever I have a lot of
stuff going on – drums, bass, keys, guitars,

amps, all kinds of stuff rocking, background
vocals, then that acoustic guitar takes more

of a rhythmic percussive type shape, and has
got more top end, way less bottom end, and

those are the two main ways that I look at
acoustics, and most of the music I’m working

in.

That is no exception for this particular song,
so similar to the bass, I’ve got what may

look like a spaghetti mess on here, but a
lot of feel and trial and error that goes

into getting the guitars to sound cool.

The main things we’re going to look at with
this video are the bottom and the top.

At the beginning of this song – let me hit
that clip again for you – we’ve got the

acoustics sort of on their own with the drums.

There’s nothing else in, the acoustics come
in and they start the song.

Take a listen to this play.

[song]

Okay.

So, I’m still working on this song, and as
I listen to that, I’m thinking, “We may

need a little more grit or something so that
the acoustics have more character,” but

sonically, I like that they’re a little more
full bodied here, versus when the vocalist

comes in, and you can see, as I click through,
right here, you’ve got the low-cut filter,

high-pass filter is at 110.

When I click over here, you’re going to see
that jump up a little bit.

A little bit makes a big difference.

It’s up to 142, and I’ve also automated this
band here.

Taking out some 223-200 or so, whereas here
it’s not out as much.

Just a couple of dB.

Then, the top on the other end, I didn’t want
these acoustics to come in too bright, because

it kind of hits you in the face and attacks
you, but there’s nothing for them to really

cut through.

A little bit in the drums, but there’s not
really much top end in the drums, and I didn’t

want them to get too pokey and stand out too
much at the beginning, so.

You look here, the high – excuse me, high-cut,
low-pass filter right there is instantiated

at about 16-17kHz, and it’s rolling off top
end, and then whenever we move into the verse,

watch what happens to this.

[song]

Cool.

So we get that top back.

Let me zoom in and show you how I’ve automated
those real quick.

Gotta love Pro Tools.

For any of you guys watching, I’ve got a couple
of e-mails about, “hey, with your system,

how are you getting so many Pro Tools errors?”

Because sometimes when I do tutorials, I get
those, but I record to two different drives.

It may be a drive thing, but then I also have
the video recording screenflow software that

is rockin’ with a full mix here.

A lot of times, tutorials I do at the end
of a mix, and I go through and I pick out

things, but anyways, my system is great.

It works amazing, and then when I do tutorials,
it can stutter from time to time, but anyways.

Let me actually get rid of the clip gain lines.

Sometimes that can cause it.

Let’s take a look back at the task at hand.

Let’s watch – the top end is out at the
beginning, whenever we transition to the verse,

some of that top end is going to come back.

[acoustic guitar]

Okay.

You can also see that if I zoom in here, I’ve
got the acoustics at 63 left and rightish

for the intro, and then they shoot out wide
at the verse – that’s another cool thing

for automation, but really, the top and bottom
sonics for the acoustic guitar is what I wanted

you to see from this, so one more time, in
context, if we come out here…

[music]

Okay.

And a lot of times, I’ll be honest, I will
leave the top end out or filtered during the

verses, and then let it open up at the chorus.

However, for those particular acoustics, I
didn’t feel like – they weren’t strumming.

They were doing the palm muting – had the
palm muting going on, so I felt like it was

still appropriate to bring the top end back
in and give a little bit of clarity so I kind

of heard the pulsing.

Kind of articulation I like to say of the
acoustic.

This one’s kind of short and sweet, but again,
when your acoustic is out solo by itself,

be it a warm, picking part or a strummed part
where there’s not much other stuff going on

for it to compete in the top end, try taking
out some of the top, opening up and letting

some of the bottom in, but then whenever you
get all of these other elements like bass,

electric guitars, and keys, and all of that
kind of stuff where you’re going to have more

low-mids, lows, fighting, competing, building
up, it’s a good idea to go in and treat these

as two separate sonic sounds.

Two separate sounds, depending upon the different
sections of the song.

A good way to do that like we showed you is
EQ’ing with simple high- and low-pass filters.

You could use shelves, you could use all kinds
of things, but anyways, I hope you dig that.

Here’s a quick one, and we’re going to move
on to the next video!

Thanks a lot!

How to Contextually EQ Acoustic Guitar in a Mix

Instant access to every in-depth mixing course from David Glenn: http://theproaudiofiles.com/members
Free mix training bundle: http://bit.ly/mixbundle
Mixing with Special FX: http://bit.ly/mixingwithspecialfx
More tutorials: http://dgrtuts.com

A video on a few ways to approach mixing acoustic guitar in the context of an arrangement.

Transcript Excerpt:

Alright, in this video, we’re going to take a look at the acoustic guitars, and with acoustics, I have kind of two main mindsets for EQ and shaping the tone of the acoustics.

We’ll look at compression in a little bit, but as far as EQ goes, when an acoustic plays by itself, I want it to have – a lot of times, I want it to have a full bodied, warm sound. Some top end, but I don’t want it to be necessarily too bright. Just to my ear, I really like a full, warm bodied acoustic sound when the guitar is by itself, and then whenever I have a lot of stuff going on – drums, bass, keys, guitars, amps, all kinds of stuff rocking, background vocals, then that acoustic guitar takes more of a rhythmic percussive type shape, and has got more top end, way less bottom end, and those are the two main ways that I look at acoustics, and most of the music I’m working in.
That is no exception for this particular song, so similar to the bass, I’ve got what may look like a spaghetti mess on here, but a lot of feel and trial and error that goes into getting the guitars to sound cool. The main things we’re going to look at with this video are the bottom and the top.

At the beginning of this song – let me hit that clip again for you – we’ve got the acoustics sort of on their own with the drums. There’s nothing else in, the acoustics come in and they start the song.

Take a listen to this play.

[song]

Okay. So, I’m still working on this song, and as I listen to that, I’m thinking, “We may need a little more grit or something so that the acoustics have more character,” but sonically, I like that they’re a little more full bodied here, versus when the vocalist comes in, and you can see, as I click through, right here, you’ve got the low-cut filter, high-pass filter is at 110. When I click over here, you’re going to see that jump up a little bit. A little bit makes a big difference. It’s up to 142, and I’ve also automated this band here. Taking out some 223-200 or so, whereas here it’s not out as much. Just a couple of dB.

Then, the top on the other end, I didn’t want these acoustics to come in too bright, because it kind of hits you in the face and attacks you, but there’s nothing for them to really cut through. A little bit in the drums, but there’s not really much top end in the drums, and I didn’t want them to get too pokey and stand out too much at the beginning, so.

You look here, the high – excuse me, high-cut, low-pass filter right there is instantiated at about 16-17kHz, and it’s rolling off top end, and then whenever we move into the verse, watch what happens to this.

[song]

Cool. So we get that top back. Let me zoom in and show you how I’ve automated those real quick. Gotta love Pro Tools.

For any of you guys watching, I’ve got a couple of e-mails about, “hey, with your system, how are you getting so many Pro Tools errors?” Because sometimes when I do tutorials, I get those, but I record to two different drives. It may be a drive thing, but then I also have the video recording screenflow software that is rockin’ with a full mix here. A lot of times, tutorials I do at the end of a mix, and I go through and I pick out things, but anyways, my system is great. It works amazing, and then when I do tutorials, it can stutter from time to time, but anyways.

Let me actually get rid of the clip gain lines. Sometimes that can cause it. Let’s take a look back at the task at hand. Let’s watch – the top end is out at the beginning, whenever we transition to the verse, some of that top end is going to come back.

[acoustic guitar]

Okay. You can also see that if I zoom in here, I’ve got the acoustics at 63 left and rightish for the intro, and then they shoot out wide at the verse – that’s another cool thing for automation, but really, the top and bottom sonics for the acoustic guitar is what I wanted you to see from this, so one more time, in context, if we come out here…

[music]

Okay. And a lot of times, I’ll be honest, I will leave the top end out or filtered during the verses, and then let it open up at the chorus. However, for those particular acoustics, I didn’t feel like – they weren’t strumming. They were doing the palm muting – had the palm muting going on, so I felt like it was still appropriate to bring the top end back in and give a little bit of clarity so I kind of heard the pulsing. Kind of articulation I like to say of the acoustic.

About The Pro Audio Files

Tutorials on mixing, mastering and producing music in Pro Tools with plugins from Waves, FabFilter, SoundToys, Softube, Sonnox, PSP, Slate Digital and more. Learn how to mix using EQ, compression and effects like reverb, delay, saturation and distortion on vocals, drums, guitar, bass and more.

How to Contextually EQ Acoustic Guitar in a Mix

The amount of plays  for the How to Contextually EQ Acoustic Guitar in a Mix video is 9949

Embedded from the The Pro Audio Files youtube channel

Duration of the “How to Contextually EQ Acoustic Guitar in a Mix” video is 06:13 hh:mm:ss

It also has already 84 likes and 2 dislikes on Youtube

Used tags for this video are fx,mixing guitar,filter,pro tools,eq,acoustic guitar,mix acoustic guitar,mixing,equalizer,mixing acoustic guitar,plugins,theproaudiofiles.com,pro-q 2,how to use eq,how to use equalizer,the pro audio files,low end,guitar,fabfilter pro-q 2,bass,fabfilter,eq tips,equalization,mixing with special fx,mix

The rating for this video is 0 stars at the moment

How to Contextually EQ Acoustic Guitar in a Mix

AudiobyRay is collecting usefull videos from youtube to present trending and up to date content for music producers.

Therefore this video “How to Contextually EQ Acoustic Guitar in a Mix” has been embedded from youtube.

The owner of this  video has already given permission to use their video by accepting the Terms and Conditions from youtube here