Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals

Watch the Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals from YouTube here

Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals

Hello, everybody.

Mark Marshall from theproaudiofiles.com and
guitaristmarkmarshall.com.

Today, I’m going to be showing some tips from
a good friend of mine; Chris Venditti from

the band, Nation Beat, and he has some great
tips about achieving a very interesting bass

tone while recording that is really a great
for a lot of world music, and also R&B.

He’s going to be using some EBS pedals in
this and straight DI into Avid Mbox, and I’m

going to be using Softube’s Bass Amp Room,
which is my go to amp emulation plug-in for

bass these days, which is great, because not
only does the amp emulation sound good, but

the DI sound it has is really fabulous as
well, and you can blend the two of them.

For this, when I plugged Chris in, I let him
play along with it, and he pretty much liked

the stock settings.

That’s one of the nice things about the Bass
Amp Room is that pretty much when you pull

it up, it’s already usable.

So, we left it pretty much alone, and he plugged
his Lakland bass into it with a couple of

pedals, and here’s what he has to say.

Chris: Hi, I’m Chris Venditti.

Some know me as Crow.

I’m a bass player.

I play with the band Nation Beat, which is
like a Brazilian-American Fusion band.

Delsonido, Cumbia, Afro-Carribean band, and
I do a lot of R&B Funk stuff and Latin stuff

in the greater New York area.

I found myself in a situation where I’m wanting
a kind of clean, almost active – I’m playing

a passive bass, but this is the Lakland with
a very clear sound, and wanting that kind

of definition to the notes, but also wanting
to keep the kind of vintage warmth, and resonance.

So, I kind of figured out this trick using
these compression pedals and a filter pedal,

both of which I particularly like.

So, basically what I do is I have this compressor
– it’s an EBS compressor – set on the

multi-band mode, so it’s compressing the lows
and the highs independently.

It really tightens up my low-end, and it kind
of crisps up my high-end at the same time.

That gives me a really even sound, but it
definitely is bright.

So what I’ve done is I’ve put this EBS compressor
that has a “down” setting so that – maybe

if I make it more obvious…

[bass plays]

It sweeps from high to low.

So, I put the threshold just so it grabs the
note if I play it rather hard, but it doesn’t

even do it…

[bass plays]

So, what that basically does is it gives me
the opportunity to play rather hard and rather

loud, and it’ll just eat the high-end a little
bit, so that I get that – I can play aggressively,

and with a lot of attack, and it still maintains
a warm sound.

The filter itself is – even in the open
mode, it still kind of takes the high-end

off, and gives a certain warmth to the sound,
kind of enhances the high-mids.

Alright, so this is completely clean.

[bass guitar]

Alright, and this is with the compressor.

[bass guitar plays]

And then with the filter.

[bass guitar plays]

A really great application of this little
setup is certainly for slapping, because I’m

not a huge fan of just mid – just doing
the contour switch on a bass amp and taking

all of the mids out, because I feel like you
just end up with this very cold, lifeless

sound, and it’s very thin, but you definitely
do need to kind of shape the sound when you

slap, and you definitely need to compress
the sound when you slap.

So, the thing about this is you get that punch,
and you get to pretty much maintain the sound

of your bass, but it’s going to kind of filter
out the nasty stuff.

So, I’ll slap a little bit just completely
clean, and I’ll play the same thing with the

compressor and the filter on.

[bass]

So, definitely a much more natural warm sound
that’s closer to what you would get with finger-style,

which is kind of – that’s like, the biggest
thing when you slap is getting the switch

between the two to be really even.

Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals

The Pro Audio Files: http://theproaudiofiles.com
Mark Marshall: http://guitaristmarkmarshall.com

A video on how you can improve DI bass guitar tone with Softube Bass Amp Room and EBS Multicomp + EQ pedals.

Transcript:

Hello, everybody. Mark Marshall from theproaudiofiles.com and guitaristmarkmarshall.com.

Today, I’m going to be showing some tips from a good friend of mine; Chris Venditti from the band, Nation Beat, and he has some great tips about achieving a very interesting bass tone while recording that is really a great for a lot of world music, and also R&B.

He’s going to be using some EBS pedals in this and straight DI into Avid Mbox, and I’m going to be using Softube’s Bass Amp Room, which is my go to amp emulation plug-in for bass these days, which is great, because not only does the amp emulation sound good, but the DI sound it has is really fabulous as well, and you can blend the two of them.

For this, when I plugged Chris in, I let him play along with it, and he pretty much liked the stock settings. That’s one of the nice things about the Bass Amp Room is that pretty much when you pull it up, it’s already usable.
So, we left it pretty much alone, and he plugged his Lakland bass into it with a couple of pedals, and here’s what he has to say.

Chris: Hi, I’m Chris Venditti. Some know me as Crow. I’m a bass player. I play with the band Nation Beat, which is like a Brazilian-American Fusion band. Delsonido, Cumbia, Afro-Carribean band, and I do a lot of R&B Funk stuff and Latin stuff in the greater New York area.

I found myself in a situation where I’m wanting a kind of clean, almost active – I’m playing a passive bass, but this is the Lakland with a very clear sound, and wanting that kind of definition to the notes, but also wanting to keep the kind of vintage warmth, and resonance.

So, I kind of figured out this trick using these compression pedals and a filter pedal, both of which I particularly like. So, basically what I do is I have this compressor – it’s an EBS compressor – set on the multi-band mode, so it’s compressing the lows and the highs independently. It really tightens up my low-end, and it kind of crisps up my high-end at the same time. That gives me a really even sound, but it definitely is bright.
So what I’ve done is I’ve put this EBS compressor that has a “down” setting so that – maybe if I make it more obvious…

[bass plays]

It sweeps from high to low. So, I put the threshold just so it grabs the note if I play it rather hard, but it doesn’t even do it…

[bass plays]

So, what that basically does is it gives me the opportunity to play rather hard and rather loud, and it’ll just eat the high-end a little bit, so that I get that – I can play aggressively, and with a lot of attack, and it still maintains a warm sound.

The filter itself is – even in the open mode, it still kind of takes the high-end off, and gives a certain warmth to the sound, kind of enhances the high-mids.

Alright, so this is completely clean.

[bass guitar]

Alright, and this is with the compressor.

[bass guitar plays]

And then with the filter.

[bass guitar plays]

A really great application of this little setup is certainly for slapping, because I’m not a huge fan of just mid – just doing the contour switch on a bass amp and taking all of the mids out, because I feel like you just end up with this very cold, lifeless sound, and it’s very thin, but you definitely do need to kind of shape the sound when you slap, and you definitely need to compress the sound when you slap.

So, the thing about this is you get that punch, and you get to pretty much maintain the sound of your bass, but it’s going to kind of filter out the nasty stuff. So, I’ll slap a little bit just completely clean, and I’ll play the same thing with the compressor and the filter on.

[bass]

So, definitely a much more natural warm sound that’s closer to what you would get with finger-style, which is kind of – that’s like, the biggest thing when you slap is getting the switch between the two to be really even.

About The Pro Audio Files

Tutorials on mixing, mastering and producing music in Pro Tools with plugins from Waves, FabFilter, SoundToys, Softube, Sonnox, PSP, Slate Digital and more. Learn how to mix using EQ, compression and effects like reverb, delay, saturation and distortion on vocals, drums, guitar, bass and more.

Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals

The amount of plays  for the Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals video is 7043

Embedded from the The Pro Audio Files youtube channel

Duration of the “Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals” video is 05:58 hh:mm:ss

It also has already 26 likes and 10 dislikes on Youtube

Used tags for this video are tone,multicomp,how to mix bass,softube bass amp room,theproaudiofiles.com,ebs,bass guitar,bass mixing techniques,pedal,bass tone,bass,logic,di bass,eq,Bass Guitar (Musical Instrument),softube,mixing bass,bass amp room,the pro audio files,di

The rating for this video is 0 stars at the moment

Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals

AudiobyRay is collecting usefull videos from youtube to present trending and up to date content for music producers.

Therefore this video “Getting Better DI Bass Tone with Softube Bass Amp Room and EBS Pedals” has been embedded from youtube.

The owner of this  video has already given permission to use their video by accepting the Terms and Conditions from youtube here